From 12 August 2026, the sum of lead, cadmium, mercury and hexavalent chromium in a packaging must not exceed 100 mg/kg, and packaging in contact with food must not contain PFAS above the thresholds in Art. 5(5). The proof is the test report, kept in the PPWR technical documentation of each packaging.
The sum of Pb + Cd + Hg + Cr VI must not exceed 100 mg/kg in the packaging or in any of its components (Art. 5(4)).
The rule already existed in the old directive; PPWR keeps it and links it to the technical documentation. It applies to all packaging, whatever the material: plastic, paper and board, glass, metal, wood, textiles, composites. The report must cover every component that matters - the body, the cap, the label, the ink, the adhesive.
From 12 August 2026, packaging in contact with food cannot be placed on the market if it exceeds 25 ppb for any PFAS measured by targeted analysis, 250 ppb for the sum of targeted PFAS or 50 ppm for total PFAS, including polymeric PFAS (Art. 5(5)).
The most exposed are paper and board with a grease barrier, fast-food packaging and some coatings and varnishes. The restriction concerns food packaging only; for other packaging, the general obligation to minimise substances of concern remains (Art. 5(1)).
A laboratory test report for each packaging (or for the identical material used in several packagings), kept in the PPWR technical documentation.
The report may come from the packaging supplier or from your own tests. The PPWR declaration of conformity refers to it; during an inspection, the authority asks for the report, not just the declaration. The report is kept for 5 years (10 years for reusable packaging).
The manufacturer of the packaging - the one under whose name or trademark the packaging is placed on the market - or the importer, for products brought in from outside the EU.
The packaging supplier must give you the necessary information (Art. 16), but liability towards the authority remains with whoever places the packaging on the market. That is why the supplier's report must be checked: it must match the exact material, cover the components and not be older than the last change of formulation.
In Yvora, heavy-metal and PFAS reports are uploaded to the packaging sheet; the application reads the document, checks the values against the limits in Art. 5 and flags what is missing before the PPWR declaration of conformity is issued.
Not for the restriction in Art. 5(5), which only concerns packaging in contact with food. The heavy-metal report remains mandatory for all packaging.
PPWR does not set a fixed frequency. The report must be redone when the material, the supplier or the formulation of the component changes.
Yes, if the packagings use exactly the same material and the same components. The technical documentation of each packaging refers to the same report.
Sources: Regulation (EU) 2025/40 on packaging and packaging waste (EUR-Lex) · European Commission - PPWR guidance and FAQ (30.03.2026)
General information on Regulation (EU) 2025/40, not legal advice on a specific case. Final compliance remains the responsibility of the economic operator.
PPWR by sector: What PPWR obligations do cosmetics manufacturers have? · What PPWR obligations do food manufacturers have? · What PPWR obligations do beverage producers have? · What PPWR obligations does an online shop have? · What PPWR obligations do pharmaceutical manufacturers have?
Practical PPWR guides: Is the PPWR declaration of conformity made per packaging or per product? · What must a distributor or retailer do under PPWR?
Buyer's guide: How to choose a PPWR application: 15 questions for any supplier
Free 48-hour demo, no card: packaging sheet, assessment, PPWR technical documentation and PPWR declaration of conformity.